09-27-2024, 08:01 AM
Hi Rosa,
Welcome to the Forum.
hopefully members will reply with some helpful information.
things that may help people reply are potential budget volume of printing for instance.
we have 2 types of printer, the S% ultimaker which we use for base models and demo's of things like morphology brige concepts. the material is not good for drilling but is cheap to produce these types of tools.
we have a Photocentric OPUs which has a large build plate so i can print 80 teeth in one go, whcihc saves labour time but the resin is not water based and the managment of the tank and material is harder.
we are looking at the phozen machine for future use with water soluble marial and small plate as a compromise.
hope this helps start the chat.
Ed
Welcome to the Forum.
hopefully members will reply with some helpful information.
things that may help people reply are potential budget volume of printing for instance.
we have 2 types of printer, the S% ultimaker which we use for base models and demo's of things like morphology brige concepts. the material is not good for drilling but is cheap to produce these types of tools.
we have a Photocentric OPUs which has a large build plate so i can print 80 teeth in one go, whcihc saves labour time but the resin is not water based and the managment of the tank and material is harder.
we are looking at the phozen machine for future use with water soluble marial and small plate as a compromise.
hope this helps start the chat.
Ed